Skip to main content
Movemiles crew loading a wrapped appliance into the truck

Residential services

Appliance Moving

Refrigerators, washers, dryers, freezers and ranges - moved without wrecking the floor or the appliance.

What we do

Appliances are the heaviest things in most homes and the least forgiving. A fridge is 250 to 400 lb on four small feet, a range has a glass top and a door that swings, and a front-load washer has a drum that will damage itself in transit if it is not secured.

They also sit in the two tightest rooms in the house. Getting a fridge out of a kitchen usually means taking its doors off, protecting the floor it is about to be dragged across, and knowing which way it can safely tilt.

We move appliances with proper appliance dollies and straps, and we tell you plainly what has to happen before we arrive - because the things that go wrong here are almost always the disconnection, not the carry.

Included

What's Included

Appliance dollies with ratchet straps
Refrigerator and freezer door removal where needed
Doors, hoses and cords secured for transit
Full blanket wrap and stretch wrap
Hardwood, tile and vinyl floor protection
Doorways and turns measured beforehand
Loaded upright and braced in the truck
Repositioned and levelled in the new home

We move and reposition appliances. Gas and water connections are a licensed trade - see the FAQs.

What we cover

Appliances We Move

Refrigerators and French-door fridges
Chest and upright freezers
Washers, including front-load
Dryers, gas and electric
Ranges, stoves and cooktops
Wall ovens and range hoods
Dishwashers
Wine fridges and beverage centres
Portable AC units and dehumidifiers

Why us

What We Plan For

  • Fridges emptied and defrosted at least 24 hours ahead
  • Front-load washers braced, with transit bolts fitted if you still have them
  • Water and gas lines disconnected by a licensed trade before we arrive
  • Appliances kept upright wherever possible, and tilted only one way when not
  • Floors protected on the drag path out of the kitchen and laundry
  • A fridge left to stand before it is plugged in at the other end

FAQs

Frequently Asked Questions

Do you disconnect and reconnect appliances?

We disconnect and reconnect standard plug-in appliances and reposition them in place. Gas lines and hard-plumbed water connections must be handled by a licensed gas fitter or plumber - in Ontario that is a legal requirement, not a preference, and we coordinate timing with whoever you use.

How long before I can plug the fridge back in?

If it stayed upright the whole way, a few hours is enough. If it had to be laid down or heavily tilted, leave it standing upright for a full 24 hours so the compressor oil drains back before you power it on.

What do I need to do before moving day?

Empty and defrost the fridge and freezer at least 24 hours ahead and dry the inside. Run the washer empty on a spin to drain it, and disconnect the hoses. Everything else we handle.

What are transit bolts and do I need them?

They are the shipping bolts that lock a front-load washer drum during transport. If you kept them from delivery, fit them or hand them to us. If not, we brace and pad the drum instead and move it more carefully.

Can you get a fridge through a narrow doorway?

Usually, by taking the doors off the fridge and sometimes off the frame. We check the measurements before the day so it is not discovered with the fridge halfway out.

Do you move a single appliance?

Yes. A single fridge, washer or range is a flat-rate job and does not need a full moving booking.

Related

You might also need

← All services

Moving an appliance?

Tell us the appliance, the stairs and whether the connections are gas or electric, and we will quote it.